0.7.d. Sparkle | Showcontroller Manual

The Sparkle / HotSpot effect is only barely visible in the preview window, but it's a big effect with real laser output.

Base for using the Sparkle effect is a frame with several intermediate points, e.g. a circle or an interpolated line.



The sparkle effect event is in the second line. Start value is set to 1 per default, end value is 2. This creates random hot spots in the frame color.

If the start value is set to 2 and the end value to 3, white hot spots are created.

Start value to 0 and end value to 1 makes one hot spot travel through the frame.

The hot spots created with this effect can exceed the MPE in an otherwise safe show!!!
Always make sure to not exceed the MPE!!!