smoke machine operate problem

Start
Prev
1
Next
End

Dimitri Colson

1 month 14 minutes ago #750 by Dimitri Colson

Replied by Dimitri Colson on topic smoke machine operate problem

Hello, I confirm that controlling a DMX fog machine is working fine after switching ShowNET interface from default DMX IN to DMX OUT and power cycle the laser (and enter the corresponding DMX channels in the Fog tab of course)

Please Log in or Create an account to join the conversation.

Showcontroller Support

11 months 1 week ago #628 by Showcontroller Support

Replied by Showcontroller Support on topic smoke machine operate problem

Hello,

so i think you use an external Shownet. Can you check the DMX Adapter ?

Please Log in or Create an account to join the conversation.

gergely laszlo
Topic Author

11 months 1 week ago #627 by gergely laszlo

Replied by gergely laszlo on topic smoke machine operate problem

step by step..

Please Log in or Create an account to join the conversation.

Bart

11 months 1 week ago #625 by Bart

Replied by Bart on topic smoke machine operate problem

Did you check this post? https://showcontroller.com/en/forum/feature-requests/107-fog-functionality-setup.html

Please Log in or Create an account to join the conversation.

gergely laszlo
Topic Author

1 year 1 month ago #518 by gergely laszlo

smoke machine operate problem was created by gergely laszlo

Hi,
I saw the video, do the same but....nothing..the smoke machine doesn't react at all.
Try with a showcontroller+ , a non laserworld laser and a chauvet geyser p7 smoke machine.via dmx.
Can You help me in some way?

Please Log in or Create an account to join the conversation.

Start
Prev
1
Next
End