Artnet Control of Showcontroller

Hello,

I’m trying to control Showcontroller via Artnet using a controller. The Controller is set up and transmitting the DMX correctly as I can see the fader movements triggering against the channel in ArtNetominator. I’ve followed the guide: https://www.showcontroller.com/en/manual/showcontroller-live/0-9-remote-control-the-software/0-9-b-artnet-control-the-software

Nothing seems to be happening in the software. The settings are all correct:
IP address is selected
Control via Artnet is enabled
Subnet is 0
Universe is 0
Start Adress is 287 (corresponds to the start address on the controller)

Is there something I’m missing? Everything looks ok from the controller as it is transmitting the right values on the right channels.

Thanks